Engage with us online:
Email us your questions for a quick response: info@allboatproducts.com
Information

Pivoting Davit System - Manual and Quick Release

> Davits for Dinghies > Pivot-Up C-ring Davits > Pivoting Davit System - Manual and Quick Release

 
 
Conveniently lowers dinghy to the water.
Davits shown mounted on optional extension bars.
Davits shown mounted on optional extension bars.
 
 
 
 
 
Back to List
 
Was: $410.00 - $610.00
Now: $399.00 - $599.00
Qty:
C-ring Size:
 
 

 

 
 
Description
Pictures - Video
Testimonials

Pivoting Davit System (6000) For Inflatable Boats - Manual or Quick Release

 

Designed to carry inflatable dinghy on swim platform of boatPivoting dinghy davit system

 

This davit is the highest quality, easiest to install, simplest to use davit system on the market. Watch the video below to see how it works.

 

The manual release means you have a bolt and nut that connects the "c-rings" component to the base bracket unit that is mounted to your swim platform. The quick release means you have a quick pull-pin instead of the bolt. Either of these two options allow you to clear the davits from your swim platform for swimmers or when you are not using the dinghy the davits can be easily stored. It does require tools to remove the manual release as it uses nuts and bolts.

 

"A davit with no expensive gluing of parts on your dinghy, no hassles, no worries....just go boating!" 

  • No gluing of fittings on inflatable.
  • Strong stainless steel retainers "cradle" inflatables securely in place (not weak plastic or alumnium).
  • Two release options: Choose the manual (bolt and nut) or quick (pull-pin) versions.
  • Maximum weight capacity: 300 lb.
  • Easy installation and use.
  • Easily removed in a couple of minutes if required, and even quicker if you choose the quick release pull-pin option.
  • Constructed of marine grade stainless steel and electropolished for extra protection.
  • Stainless steel mounting hardware included.
  • Dinghy may be pulled tightly against transom of larger vessel and lifting lines used to secure dinghy to cleats of vessel.
  • Comes with added backing plates at no extra charge.
  • Recommend "holding lines" to secure boat to larger vessel as shown in drawing.
  • Support pads: 3" wide by 12" long are welded to bottom section of rings for extra support of inflatable dinghy.
  • Choose between 3 sizes: 16 inch, 17 inch or large 18 inch tubeset diameters (that diameter of the inflatable sponson of your dinghy).
  • Weight: approxaimately 9 lbs
  • Works great with the Pivoting Motor Mount Bracket.
  • Optional davit mount extensions also available.
  • Optional stand-off bars are recommended to keep dinghy in upright position on swim step.
  • Davit lift winch system helps you easily pivot up the dinghy in its c-ring cradles (great for heavy dinghies and when swim platform is higher than normal above waterline).

 

 

Watch this video that shows the davit system and stand-off bars in action. It also shows how you use rope tied to the davit c-rings loops to help you pivot the dinghy up when in the c-rings and secure the dinghy with those sames ropes.

 

 

      

 


Quick release with pull-pins shown above.

 

Need More Room On Your Swim Platform?

Need extensions to push your Pivoting Davit System farther outboard aft to give you more room on your swim platform? 18" Davit Mount Extensions offer you another 12" of room and are also convenient if you need to install the davit system on a swim platform with obstructions, ladders, hardware and other items that may be in the way of installation and use.

 

Watch this video that shows the davit system and stand-off bars in action. It also shows how you use rope tied to the davit c-rings loops to help you pivot the dinghy up when in the c-rings and secure the dinghy with those sames ropes.

 


Quick release davit system showing the pull pins that mount the c-rings to the base mounting units. This allows you to quickly clear the davits from your swim platform for swimmers or when you are not using the dinghy the davits can be easily stored. The manual release system uses nuts and bolts where the pull-pins would be.

dinghy davit system for inflatable boats

 

 


  Pivoting dinghy davit system

Pivoting dinghy davit system   Pivoting dinghy davit system

Pivoting dinghy davit system

 

 


Pivot davit allows for great flexibility.

Davit pivots down deep towards or into the water for ease of use - subject to height above water of swim platform.

Large 17" diameter accommodates most inflatable dinghy yacht tender sizes.

All stainless steel high quality construction.

"The "kiss" approach to dingy mounting. "keep it simple stupid"....which is what you offer with the 6000 system."

David Eastwood, TWO SEAS, 32' Island Gypsy.

       

 

"I would be more than happy to tell you and others how pleased I am with your davit system. I searched the web and looked at a few systems but none can compare to yours. The picture you see here is of my boat on the St Lawrence River this past summer. While we were up there we stopped at a place called Bold Castle. We were just getting ready to leave when a fellow boater notice my dinghy and it's davit support. I had him come onboard and even try it for himself. He was very impressed with it and to the point where he wanted to give me his phone number so that when I got home I could call him with your website. Lucky for him I keep all my paper work for the boat on the boat. I was able to give him all the information he needed to contact you. I can only believe he did along with a few of his boating pals. I will be contacting you because I need to purchase the standoffs for the dinghy. You really need to advertise more on the East Coast. I think your Davit System would be a big seller here. It's only a matter of time until I move up to a larger boat and I will be in need of another one of your davits. I'll be sure to call."

Thanks again Paul A. Batz

Related Products
Stand Off Bars for any Davit System
Was: $189.00
Now: $185.00
Davit Mount Extensions
Was: $204.00
Now: $199.00
Adjustable Pivoting Outboard Motor Mount Bracket for Inflatable boats and dinghies
Was: $595.00
Now: $579.00
Search
0 Items
$0.00
Join our Newsletter
Featured Products
Tilting pull-on davit system for inflatable boats
$995.00 - $1,395.00
H3O high quality winch on davit System for inflatable boats
Was: $2,988.00 - $5,783.00
Now: $2,888.00 - $5,683.00
Keel guard keelshield strip
Was: $229.00
Now: $199.00
Specials
Pivoting Davit System For Inflatable Boats
Was: $410.00 - $610.00
Now: $399.00 - $599.00
Top Sellers