Join our communities:
Love your boat. Spoil yourself!
Email: info@allboatproducts.com Call toll-free: 1-888-309-0990
Join our Newsletter
Search
Categories
Information

Boat Dolly

Products > Boat Carts & Dollies > Boat Dollies > Boat Dolly

 
 
 
 
 
 
Back to List
 
$600.00 - $797.00
Qty:
Wheel Type:
 
 
 
 
Description
Adjustments
Comparison Chart
Product Reviews

Beach Dolly

This is the most versatile boat dolly on the market today. 


Features: 

  • Single frame adjusts three ways: length, width, and height.
  • Length adjusts to accommodate boats up to 19’ (5.8 m) long.
  • Width adjusts to accommodate boats up to 7’ (2.1 m) wide.
  • Height adjust vertical uprights to increase ground clearance.
  • Adjustable sling support strap cradles the boat hull (see Adjustment tab)
  • Heavy-duty, marine-grade aluminum frame, anodized inside and outside.
  • Stainless Steel Hardware.
  • Five Wheel Options..

 

One single adjustable frame is paired with five wheel choices to make the Boat Dolly (WZ1-BD) unique, user-friendly, and back-saving. Any terrain can be negotiated and a large boat weight range is covered. Use for Sunfish, small sailboats, fishing boats, kayak fishing equipment, and more.

 

This Boat Dolly includes:
4– Main frame sections
2– Assembled uprights w/ rollers
1– Assembled Bow Stop Roller
1– Cross-Strap
2– Axles w/ Quick Clip Pins (QCP)
7– Wire Lock Pins (WLP)
1– Handle w/ foam grips
1– Foam Bow Stop Bumper
Wheels according to your choice


Capacity    
  

  • 26cm (10.2”) Tuff-Tire polyurethane foam wheels for flat-proof & maintenance-free operation on firm surfaces for payloads up to 250 lbs. (110 kg)
  • 38cm (15”) Tuff-Tire polyurethane foam wheels for flat-proof & maintenance-free operation on firm surfaces for payloads up to 500 lbs. (220 kg)
  • 30cm (11.7”) balloon wheels for payloads to 250 lbs (110 kg) on sand or other uneven terrain.
  • 42cm (16.5”) balloon wheels for payloads to 350 lbs (160 kg) on sand or other uneven terrain.
  • 49cm (19.3”) balloon wheels for payloads to 500 lbs (220 kg) on sand or other uneven terrain.

                       
Weight

      Dolly Frame without wheels: 50 lbs. (22 kg)  (See Comparison Chart for wheel wights)

                       
Dimensions
     

Overall Frame Length inches cm
Minimum 96 244
Maximum 124 315
Tongue Length: Adjustable in 6.5” (16.5 cm) increments. This measurement is taken from the most forward end of the Angled Tongue Section to the aft part of the Axle Cross Beam.
Overall Frame Width inches cm
Minimum 60 152
Maximum 95 241
Axle Cross Beam: Adjustable in 6” (15 cm) increments: Note that each side adjusts 6” (15 cm); subsequently, adjusting both sides equals 12” (30 cm).
Beam Width inches cm
Minimum 54 137
Maximum 89 226
Axle Beam Width: Adjustable in 6” (15 cm) increments: This measurement is taken from the inside edges of the left and right Upright Stanchion Rollers.
Upright Stanchion Height inches cm
Minimum 14 36
Maximum 18 46
Strap Support Height: Adjustable in 1” (2.5 cm) increments. This measurement is taken from the top of the Axle Cross Beam to the top of the Upright Stanchion Roller.


 

 

Materials

      Frame: Heavy-duty, marine-grade aluminum frame, anodized inside and outside.

      Pads: PVC Foam

      Hardware: Stainless steel

      Wheels:  30cm, 42cm, 49cm Balloon Wheel

                                     Tire: Polyurethane
                                     Hub: Polypropylene
                                     Bearing: Stainless steel balls in nylon reinforced housing

                         26cm, 38cm Solid Foam Wheel
                                     Tire: Durable 700gr-density polyurethane foam
                                     Hub: Polypropylene
                                     Bushing: Nylon reinforced

 

 

Loading Techniques

 

Note: These are abbreviated instructions. See Adjustment tab for more information

#1 - Adjust Boat Dolly width using the Wire Lock Pins. 

  • After you determined the beam of your boat, adjust the Upright Stanchions so that your boat will rest between the Upright Rollers, NOT on them.
  • Secure Hull Cross Strap prior to loading boat onto the dolly.

#2 - Adjust Boat Dolly length using the Wire Lock Pins.  Bolts, washers and nuts are used for the Bow Stop Roller.

  • Determine boat’s center of gravity (CG):  Pull boat onto dolly until it balances on the Hull Cross Strap - this is the CG for your boat.  
  • Adjust dolly length so that your boat rests against the Bow Stop Bumper.
  • Move the Bow Stop Roller to a position that best supports your boat.
  • If tongue weight is heavy, shorten dolly length to move the CG aft.  
  • If tongue weight is light, lengthen the dolly to move the CG forward.

#3 - Adjust Boat Dolly height using bolts, washers and nuts.

  • Adjust the Upright Stanchions so that your boat has several inches of clearance above the Axle Cross Beam when loaded.

 

 

Changing Wheels Video:

 

 

Boat Dolly with...
Utility Wheels
for firm surfaces.
Low-Pressure, Balloon Wheels
for soft sand and challenging terrain.
26cm wheel for Boat Dolly
 
38cm Utility Wheel for Boat Dolly
 
30cm Balloon Wheel for Boat Dolly
 
42cm Balloon Wheel for Boat Dolly
 
49cm Balloon Wheel for Boat Dolly
 
26cm Wheels 38cm Wheels 30cm Wheels 42cm Wheels 49cm Wheels

 

  

 

Boat Dolly with 26cm Wheels

 

 

Boat Dolly with 38cm Wheels

 

 

Boat Dolly with 30cm Wheels

 

 

Boat Dolly with 42cm Wheels

 

 

Boat Dolly with 49cm Wheels

Boat Dolly Adjustments

 

 Boat Dolly Adjustments

PLEASE READ THESE INSTRUCTIONS COMPLETELY PRIOR TO LOADING YOUR BOAT ONTO THE DOLLY.


You will need to know two dimensions prior to adjusting and loading your boat onto the Boat Dolly:

  1. Beam – Measure the beam.  You will use this dimension to determine the distance between the Upright Stanchion Rollers. 
  2. Length – Measure the length of the boat and note the center or middle.  You will use this dimension to estimate the Center of Gravity (CG)*.

#1 - Adjust Boat Dolly width using the Wire Lock Pins. 

  • After you determined the beam of your boat, adjust the Upright Stanchions so that your boat will rest between the Upright Rollers, NOT on them.
  • Secure Hull Cross Strap prior to loading boat onto the dolly.

#2 - Adjust Boat Dolly length using the Wire Lock Pins.  Bolts, washers and nuts are used for the Bow Stop Roller.

  • Determine boat’s CG:  Pull boat onto dolly until it balances on the Hull Cross Strap - this is the CG for your boat.  

NOTE: The CG is not necessarily the ‘center’ or ‘middle’ of the boat, however, the measurement made earlier is a fair estimate and a good starting point.

  • Adjust dolly length so that your boat rests against the Bow Stop Bumper.
  • Move the Bow Stop Roller to a position that best supports your boat.
  • If tongue weight is heavy, shorten dolly length to move the CG aft.  
  • If tongue weight is light, lengthen the dolly to move the CG forward.

#3 - Adjust Boat Dolly height using bolts, washers and nuts.

  • Adjust the Upright Stanchions so that your boat has several inches of clearance above the Axle Cross Beam when loaded.

NOTE:  The Hull Cross Strap is a tightly woven nylon, but may stretch slightly over time.  Check for proper installation and support prior to each use. 

 

Boat Dolly with...

 

  Low-Pressure, Balloon Wheels for soft sand and challenging terrain. Utility Wheels for firm surfaces.
The Boat Dolly comes with the following wheel options: 49cm Balloon Wheel for Boat Dolly
 
42cm Balloon Wheel for Boat Dolly
 
30cm Balloon Wheel for Boat Dolly
 
38cm Utility Wheel for Boat Dolly
 
26cm wheel for Boat Dolly
 
Product Name
& Number
Boat Dolly 49
WZ1-BD49UB
Boat Dolly 42
WZ1-BD42UB
Boat Dolly 30
WZ1-BD30UB
Boat Dolly 38
WZ1-BD38TT
Boat Dolly 26
WZ1-BD26TT
Wheel Type Low-Pressure
Ballon
Low-Pressure
Ballon
Low-Pressure
Ballon
Solid Foam
Tuff-Tires
Solid Foam
Tuff-Tires
Best for Use On Soft sand & other challenging terrain Soft sand & other challenging terrain Soft sand & other challenging terrain Firmer Surfaces Firmer Surfaces
Wheel Dimension 19.3 x 9"
(49 x 23 cm)
16.5 x 7.9"
(42 x 20 cm)
11.8 x 7"
(30 x 18 cm)
15 x 3.4"
(38 x 8.6 cm)
10.2 x 3"
(26 x 8 cm)
Wheel Weight 6.1 lbs (2.78 kg) 5.5 lbs (2.5 kg) 2.9 lbs (1.32 kg) 5.4 lbs (2.4 kg) 2.65 lbs (1.2 kg)
Payload Capacity 500 lbs (227 kg) 350 lbs (159 kg) 250 lbs (113 kg) 500 lbs (227 kg) 250 lbs (113 kg)
Weight w/ wheels 62.2 lbs (28.2 kg) 61 lbs (27.7 kg) 55.8 lbs (25.3 kg) 60.8 lbs (27.6 kg) 55.3 lbs (25.1 kg)
Frame Material Marine grade
anodized aluminum
Marine grade
anodized aluminum
Marine grade
anodized aluminum
Marine grade
anodized aluminum
Marine grade
anodized aluminum
Frame Length (adjustable 6" increments) adjustable from
96"- 124"
(244 cm - 315 cm)
adjustable from
96" - 124"
(244 cm - 315 cm)
adjustable from
96" - 124"
(244 cm - 315 cm)
adjustable from
96" - 124"
(244 cm - 315 cm)
adjustable from
96" - 124"
(244 cm - 315 cm)
Frame Width (adjustable 6.5" increments) adjustable from
60" - 95"
(152 cm - 241 cm)
adjustable from
60" - 95"
(152 cm - 241 cm)
adjustable from
60" - 95"
(152 cm - 241 cm)
adjustable from
60" - 95"
(152 cm - 241 cm)
adjustable from
60" - 95"
(152 cm - 241 cm)
Beam Width (adjustable 1" increments) adjustable from
54" - 89"
(137 cm - 226 cm)
adjustable from
54" - 89"
(137 cm - 226 cm)
adjustable from
54" - 89"
(137 cm - 226 cm)
adjustable from
54" - 89"
(137 cm - 226 cm)
adjustable from
54" - 89"
(137 cm - 226 cm)

 

There are no customer reviews for this product. However, you can be the first person to add a review for this product.

Log in to submit a review
Add Review
Name:
Review:
Rating:
 
 
 
 
 
 

(Your browser will be redirected back to this page)
0 Items
$0.00
A safe shopping experience!



Specials
Inflatable Boat & Product Repair Paint
Was: $369.00 - $419.00
Now: $329.00 - $379.00
Featured Products
Inflatable Boat & Product Repair Paint
Was: $129.00 - $159.00
Now: $119.00 - $149.00
13' Bounce & Splash Padded Trampoline
Was: $949.99
Now: $799.99
Top Sellers
Dinghy Sling Davit and Cargo Net
Top Side Paint
Was: $39.00
Now: $36.00
Inflatable Boat & Product Repair Paint
Was: $199.00 - $219.00
Now: $189.00 - $209.00
New Arrivals